Re: VTP Pruning

From: Fahad Khan (fahad.khan@gmail.com)
Date: Mon Jul 14 2008 - 09:25:50 ART

• Next message: Petr Lapukhov: "Re: Undress which topic in the DOC CD configuration guide and"
• Previous message: ccie: "ip verify unicast source reachable-via rx 10 vs. ip verify"
• Maybe in reply to: akyccie: "VTP Pruning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

you configure vtp pruning on master and check the results on clients by show
interface trunk command

thanks and regards,

On Sun, Jul 13, 2008 at 3:58 AM, akyccie <akyccie@gmail.com> wrote:

> How to verify VTP pruning is working as expected. "shpw VTP status" command
> only show whether it's enable of not. How to verify the desired result
> configuring VTP Pruning. Thanks
>
> Switch> show vtp status
> VTP Version : 2
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 45
> VTP Operating Mode : Server
> VTP Domain Name : ccie
> VTP Pruning Mode : Enabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Enabled
> MD5 digest : 0x3A 0x29 0x86 0x39 0xB4 0x5D 0x58 0xD7
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>

-- 
*FAHAD KHAN
BE Computer Systems NED,
CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE (Written)
Systems Support Engineer, Premier Systems (Pvt) limited,
Karachi, Pakistan
92-321-2370510.*

• Next message: Petr Lapukhov: "Re: Undress which topic in the DOC CD configuration guide and"
• Previous message: ccie: "ip verify unicast source reachable-via rx 10 vs. ip verify"
• Maybe in reply to: akyccie: "VTP Pruning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:55 ART