From: Muhammad Nasim (muhammad.nasim@gmail.com)
Date: Mon Jun 16 2008 - 19:48:24 ART
I re-imaged the switch but still no luck
any more ideas
2008/6/16 Tyson Scott <tscott@ipexpert.com>:
> You could still try to do a password recovery to see if it can
> recover. Where you are is the last step befor the nvram is loaded so
> it is worth testing.
>
> On Sun, Jun 15, 2008 at 11:13 AM, Muhammad Nasim
> <muhammad.nasim@gmail.com> wrote:
> > It was a power shut down in the building and then after few mintues power
> > was up before that the switch was working fine.
> >
> > Right now there is no configuration on the switch so confgiuration can
> not
> > be a issue
> >
> >
> >
> > 2008/6/15 L Pham <ccie17030@gmail.com>:
> >
> >> What happen BEFORE the restart ?
> >>
> >> On Sun, Jun 15, 2008 at 7:58 AM, Muhammad Nasim
> >> <muhammad.nasim@gmail.com> wrote:
> >> > Dear All,
> >> >
> >> > I have switch 3560 with 48 ports with POE. It was working fine but now
> >> after
> >> > a restart it is hang and below is the output where it hangs. Does this
> >> > happens to anyone. I already changed the image even formated the flash
> >> and
> >> > copy new image and boot but no luck still hanging on the same output.
> >> >
> >> > Below is the output.
> >> >
> >> > Initializing flashfs...
> >> >
> >> > flashfs[1]: 1 files, 1 directories
> >> > flashfs[1]: 0 orphaned files, 0 orphaned directories
> >> > flashfs[1]: Total bytes: 15998976
> >> > flashfs[1]: Bytes used: 6434304
> >> > flashfs[1]: Bytes available: 9564672
> >> > flashfs[1]: flashfs fsck took 1 seconds.
> >> > flashfs[1]: Initialization complete....done Initializing flashfs.
> >> >
> >> > POST: CPU MIC register Tests : Begin
> >> > POST: CPU MIC register Tests : End, Status Passed
> >> >
> >> > POST: PortASIC Memory Tests : Begin
> >> > POST: PortASIC Memory Tests : End, Status Passed
> >> >
> >> > POST: CPU MIC PortASIC interface Loopback Tests : Begin
> >> > POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed
> >> >
> >> > POST: PortASIC RingLoopback Tests : Begin
> >> > POST: PortASIC RingLoopback Tests : End, Status Passed
> >> >
> >> > POST: Inline Power Controller Tests : Begin
> >> > POST: Inline Power Controller Tests : End, Status Passed
> >> >
> >> > POST: PortASIC CAM Subsystem Tests : Begin
> >> > POST: PortASIC CAM Subsystem Tests : End, Status Passed
> >> >
> >> > POST: PortASIC Port Loopback Tests : Begin
> >> > POST: PortASIC Port Loopback Tests : End, Status Passed
> >> >
> >> > Waiting for Port download...Complete
> >> >
> >> > cisco WS-C3560-48PS (PowerPC405) processor (revision N0) with
> >> 118784K/12280K
> >> > byt
> >> > es of memory.
> >> > Processor board ID FDO1132Z6AS
> >> > Last reset from power-on
> >> > 1 Virtual Ethernet interface
> >> > 48 FastEthernet interfaces
> >> > 4 Gigabit Ethernet interfaces
> >> > The password-recovery mechanism is enabled.
> >> >
> >> > 512K bytes of flash-simulated non-volatile configuration memory.
> >> > Base ethernet MAC Address : 00:1D:45:69:CD:80
> >> > Motherboard assembly number : 73-9676-12
> >> > Power supply part number : 341-0029-05
> >> > Motherboard serial number : FDO113202PW
> >> > Power supply serial number : LIT11300B61
> >> > Model revision number : N0
> >> > Motherboard revision number : B0
> >> > Model number : WS-C3560-48PS-S
> >> > System serial number : FDO1132Z6AS
> >> > SFP Module assembly part number : 73-7757-03
> >> > SFP Module revision Number : A0
> >> > SFP Module serial number : FDO11310AM7
> >> > Top Assembly Part Number : 800-25859-03
> >> > Top Assembly Revision Number : J0
> >> > Version ID : V04
> >> > CLEI Code Number : CNMV3N0CRC
> >> > Hardware Board Revision Number : 0x01
> >> >
> >> >
> >> > Switch Ports Model SW Version SW Image
> >> > ------ ----- ----- ---------- ----------
> >> > * 1 52 WS-C3560-48PS 12.2(25)SEE4
> C3560-IPBASE-M
> >> >
> >> >
> >> > It hangs here and after that not going any further.
> >> >
> >> > Any help and inputs required.
> >> >
> >> > --
> >> > Muhammad Nasim
> >> > Network Engineer
> >> > Saudi Arabia
> >> >
> >> >
> >> >
> _______________________________________________________________________
> >> > Subscription information may be found at:
> >> > http://www.groupstudy.com/list/CCIELab.html
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> > --
> > Muhammad Nasim
> > Network Engineer
> > Saudi Arabia
> >
> >
>
>
>
> --
> Tyson Scott - CCIE #13513 R&S and Security
> Technical Instructor - IPexpert, Inc.
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> Mailto: tscott@ipexpert.com
>
-- Muhammad Nasim Network Engineer Saudi Arabia
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART