RE: ¦^ÂСG Does this NM-1DHV2-T1

From: Zahid Hassan (zhassan@gmx.net)
Date: Mon Jun 02 2008 - 18:29:59 ART

Just a note, PVDM2 is only supported on a NM-HDV2 or on an ISR router
(2800/3800) directly on the board.

NM-HDV supports the first generation of PVDM, referenced as PVDM-12.

The links below explains this further detail:

NM-HDV
-------
 <http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a008
00b65d6.shtml>
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a00800
b65d6.shtml

NH-HDV2
--------
 <http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008
039c333.shtml>
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00803
9c333.shtml

Regards,

Zahid

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
davidytk@netvigator.com
Sent: 02 June 2008 08:48
To: ccie; ccielab@groupstudy.com
Subject: eh&o< Does this NM-1DHV2-T1/TE comes with any DSPs? Or I have to
purchase DSP in addition to the NM to get the E1 interface operate?

Hi

NM-HDV is only a network module for supporting DSP. You need to buy a PVDM2 to
insert to the network module to support DSP.

>
> 1H%s*L: "ccie" <ccie@just-horizon.com>
> $i4A: 2008/06/02 ,P4A$@ $U$H 03:44:21 HKT
> &,%s*L: <ccielab@groupstudy.com>
> %D&.: Does this NM-1DHV2-T1/TE comes with any DSPs? Or I have to
> purchase DSP in addition to the NM to get the E1 interface operate?
>
> Dear Experts,
>
>
>
> Does this NM-1HDV2-T1/E1 comes with any DSPs? Or I have to purchase
> DSP in addition to the NM to get the E1 interface operate?
>
>
>
> Regards,
>
> Amin
>
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:20 ART