From: atlantaccie@gmail.com
Date: Mon May 19 2008 - 23:17:26 ART
I am working on this lab where SW1 and SW2 are connected via FA0/13 on both
sides. Its a basic trunk config
R1 fa0/0 is connected to fa0/1 on SW1
R3 e0/0 is connected to fa0/3 on SW1
R6 fa0/0 is connected to fa0/6 on SW2
sw1#monitor session 1 source vlan 13 rx
sw1#monitor session 1 destination remote vlan 100 reflector-port INTERFACE
(What will go here)
According to DOCCD
For interface, specify the interface that will flood the RSPAN traffic onto the
RSPAN VLAN. so in my case, will it be fa0/0 of R6? But when I try to ? @ SW1
after reflector-port, it gives me option to put fastethernet0/1-24 or g0/0-0/1.
I am kind of confused. Any help would be highly appreciated.
Thank you!
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART