From: Atlanta CCIE (atlantaccie@gmail.com)
Date: Mon May 19 2008 - 23:13:56 ART
I am working on this lab where SW1 and SW2 are connected via FA0/13 on both
sides. Its a basic trunk config
R1 fa0/0 is connected to fa0/1 on SW1
R3 e0/0 is connected to fa0/3 on SW1
R6 fa0/0 is connected to fa0/6 on SW2
sw1#monitor session 1 source vlan 13 rx
sw1#monitor session 1 destination remote vlan 100 reflector-port INTERFACE
(What will go here)
According to DOCCD
For *interface*, specify the interface that will flood the RSPAN traffic
onto the RSPAN VLAN. so in my case, will it be fa0/0 of R6? But when I try
to ? @ SW1 after reflector-port, it gives me option to put
fastethernet0/1-24 or g0/0-0/1.
I am kind of confused. Any help would be highly appreciated.
Thank you!
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART