From: cisco-addicted (cisco.addicted@gmail.com)
Date: Sun Mar 16 2008 - 21:42:52 ART
Dears,
I configured a partial frame relay between three routers (R1, R2 & R3) with
R2 as a HUB and R1 & R3 the spokes.
The L2 configuration for mapping the DLCI is working fine and I can ping all
the interfaces with broadcast keywork added in the mapping statement.
The problem is we I configured the EIGRP AS 100 between them the adjacency
come up, but I always got the following error in R3 ( the spoke) mentioning
that the other Spoke's IP address is not down.!!!!!
May someone explain what is the reason for this flapping???
Rack1R3(config-router)#
*May 9 05:25:03.785: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
183.1.123.1 (Serial1/0) is down: retry limit exceeded
Rack1R3(config-router)#
*May 9 05:25:49.965: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
183.1.123.1 (Serial1/0) is up: new adjacency
Rack1R3(config-router)#
Rack1R3#
*May 9 05:26:01.445: %SYS-5-CONFIG_I: Configured from console by console
Rack1R3#
*May 9 05:28:54.477: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
183.1.123.1 (Serial1/0) is down: retry limit exceeded
Rack1R3#
*May 9 05:29:20.069: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
183.1.123.1 (Serial1/0) is up: new adjacency
Rack1R3#
Thanks in advance gang.
Moe
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART