From: Ed Lui (edwlui@gmail.com)
Date: Fri Mar 07 2008 - 16:14:00 ARST
Thanks Rich. There was no troubleshooting section on that particular lab. In
the real lab, I think the best choice is to get up and ask the proctor. :-)
Now I learned something......
On Fri, Mar 7, 2008 at 9:37 AM, Rich Collins <nilsi2002@gmail.com> wrote:
> Hi Lui,
>
> I guess you should follow the diagram. Perhaps the mock lab has some
> built-in errors (in the startup config) which you should find and correct -
> even it means removing or changing an IP address to meet the diagram and any
> other requirements.
>
> -Rich
>
>
> On 3/6/08, Ed Lui <edwlui@gmail.com> wrote:
> >
> > Hi Rich,
> >
> > It was an access port on vlan 58. As it was the original config. EIGRP
> > neighbor was formed. Everything was OK. I just did not get points for the
> > task because per the grader it should be an routed port instead of an access
> > port. That's why I am seeking clarification. Was it my problem or it can be
> > viewed at a different angle.
> >
> > :-)
> >
> > Thanks for your input though,
> > Lui
> >
> > ----- Original Message -----
> > *From:* Rich Collins <nilsi2002@gmail.com>
> > *To:* Ed Lui <edwlui@gmail.com>
> > *Cc:* ccielab@groupstudy.com
> > *Sent:* Thursday, March 06, 2008 3:32 PM
> > *Subject:* Re: Lab exam SUCCEED or FAILED
> >
> >
> > For part#3 do you think it was possible to make Fa0/20 an access vlan
> > port (VLAN 58)? In that case you are not removing the ip address from the
> > SVI and almost match the diagram.
> >
> > On Wed, Mar 5, 2008 at 9:34 PM, Ed Lui <edwlui@gmail.com> wrote:
> >
> > > I am not sure if everyone can access the diagram. If not, I will post
> > > it
> > > again.
> > >
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:52 ART