multipoint non-broadcast ospf interface with MPLS TE

From: Peter Svidler (doubleccie@yahoo.com)
Date: Wed Feb 27 2008 - 19:19:15 ARST

• Next message: Gary Duncanson: "Re: Unassigned CCIE query."
• Previous message: YourPal: "Re: Issue advertising default route into RIP using "ip"
• Next in thread: Rich Collins: "Re: multipoint non-broadcast ospf interface with MPLS TE"
• Maybe reply: Rich Collins: "Re: multipoint non-broadcast ospf interface with MPLS TE"
• Maybe reply: Todd, Douglas M.: "RE: multipoint non-broadcast ospf interface with MPLS TE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

folks
  I am practising IE lab 1 for service provider , one of the tasks was to stop any device on the vlan from listening to ospf between two routers
   
  by converting the interface types to non-broadcast on the routers , and configure them as neighbors , the routes moved fine between them
   
   
  however ; when i build Traffic Engineering tunnel for MPLS , the tunnel never goes up unless i changed the interface of the ospf from non-broadcast to multipoint non-broadcast
   
  now my question is , first what is the "multipoint non-broadcast " interface and how is that different from either multicast or non-broadcast alone .
   
  second , what is the effect of that on TE ?
   
  thanks
   
   
   

       
---------------------------------
Never miss a thing. Make Yahoo your homepage.

• Next message: Gary Duncanson: "Re: Unassigned CCIE query."
• Previous message: YourPal: "Re: Issue advertising default route into RIP using "ip"
• Next in thread: Rich Collins: "Re: multipoint non-broadcast ospf interface with MPLS TE"
• Maybe reply: Rich Collins: "Re: multipoint non-broadcast ospf interface with MPLS TE"
• Maybe reply: Todd, Douglas M.: "RE: multipoint non-broadcast ospf interface with MPLS TE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:50 ARST