From: rodrigo.gutierrez@nsn.com
Date: Mon Feb 25 2008 - 15:17:51 ARST
Shine,
Got you thanks,
Rodrigo Gutiirrez
IP/Engineer.
Cisco Certified Network Professional, CCNP
Mobile Phone # :57-310-580-0973
Monday - Friday : 8:00-16:00 EST
rodrigo.gutierrez@nsn.com
Nokia Siemens Networks
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of ext Shine Joseph
>Sent: Sabado, 23 de Febrero de 2008 02:54 p.m.
>To: Gutierrez Rodrigo (NSN - CO/Santa Fe de Bogota);
>ccielab@groupstudy.com
>Subject: RE: BGP-WEIGHT
>
>Rodrigo,
>
>I don't think there is a difference in your specific case
>here. Either would provide the prefixes learned from the
>neighbor with a WEIGHT value of 100.
>
>Now, what would you do if a couple prefixes being learned from
>this neighbour needs to have a weight attribute of 100? Can
>you use WEIGHT in the neighbour statement?
>
>HTH,
>Shine
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of rodrigo.gutierrez@nsn.com
>Sent: Friday, 22 February 2008 9:46 AM
>To: ccielab@groupstudy.com
>Subject: RE: BGP-WEIGHT
>
>Hi,
>
>When using the attribute weight on BGP, what is the difference
>and when it should be used either on a route-map or directly
>with the neighbor, example:
>
>router bgp 100
> no synchronization
> bgp router-id 150.6.6.6
> bgp log-neighbor-changes
> neighbor 54.6.3.254 remote-as 54
> neighbor 54.6.3.254 weight 100
>
>Versus
>
>router bgp 100
> no synchronization
> bgp router-id 150.6.6.6
> bgp log-neighbor-changes
> neighbor 54.6.3.254 remote-as 54
> neighbor 54.6.3.254 route-map SET-WEIGHT in
>
>Route-map SET-WEIGHT permit 10
>- set weight 100
>
>Thanks
>
>Rodrigo Gutiirrez
>IP/Engineer.
>
>Rodrigo Gutiirrez
>IP/Engineer.
>Cisco Certified Network Professional, CCNP Mobile Phone #
>:57-310-580-0973 Monday - Friday : 8:00-16:00 EST
>rodrigo.gutierrez@nsn.com Nokia Siemens Networks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST