From: Fang Gao (fanggao@gmail.com)
Date: Thu Feb 21 2008 - 11:39:11 ARST
There are lots of commands in 3550 are not supported by 3560.
"mac-address-table static" is one of non-supported command in 3560
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12244se/scg/swuncli.htm#wp1042733
THT
On Wed, Feb 20, 2008 at 6:09 PM, YourPal <dearprudence28@gmail.com> wrote:
> Hi Group,
>
> I have this scenario.
>
> A Cat3550 has the following interfaces in VLAN 1363:
>
> Fa0/1 - To R1's Fa0/0
> Fa0/3 - To R3's Fa0/0
>
> R1 and R3 run EIGRP on their Fa0/0 interfaces. I'd like to prevent them
> from
> forming neighbor with each other. Besides using VACL, the following
> solution
> seems to work:
>
> !
> no ip igmp snooping vlan 1363
> mac-address-table static 0100.5e00.000a vlan 1363 interface
> FastEthernet0/24
> !
>
> Where Fa0/24 is any unused/not connected port and 0100.5e00.000a is the
> MAC
> address of the EIGRP multicast address 224.0.0.10.
>
> However, the same solution applied to Cat3560 doesn't yield the same
> result.
> I have to configure an ACL on the ports to deny EIGRP packets.
>
> Anyone please help.
>
>
> Thank you.
>
> BR,
> Emil
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST