From: Tarun Pahuja (pahujat@gmail.com)
Date: Mon Feb 18 2008 - 10:14:03 ARST
Tandou,
Not all the features of Marking and classification are
supported in all directions and or platforms. The supported features depend
upon hardware platform, IOS installed, feature Cards, etc.
Please have a look at the following link which does a very good comparison
between features and hardware platforms:
http://www.netcraftsmen.net/welcher/papers/qosfor6500.html
HTH,
Tarun
On 2/17/08, Tandou Mohamed <dtandou@yahoo.com> wrote:
>
> Hello GS,
> can someone check this errors below and let me know what's wrong ? it this
> an ios issue ? Please help.
>
> Thanks
>
> Mohamed
>
> Rack1SW1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> Rack1SW1(config)#cla
> Rack1SW1(config)#class-map ma
> Rack1SW1(config)#class-map match-al
> Rack1SW1(config)#class-map match-all VLAN
> Rack1SW1(config-cmap)#ma
> Rack1SW1(config-cmap)#match vl
> Rack1SW1(config-cmap)#match vlan 90
> Rack1SW1(config-cmap)#exi
> Rack1SW1(config-cmap)#exit
> Rack1SW1(config)#polic
> Rack1SW1(config)#policy-map
> Rack1SW1(config)#policy-map MYPOLICY
> Rack1SW1(config)#policy-map MYPOLICY
> Rack1SW1(config-pmap)#cla
> Rack1SW1(config-pmap)#class VLAN
> Rack1SW1(config-pmap-c)#se
> Rack1SW1(config-pmap-c)#set ip pr
> Rack1SW1(config-pmap-c)#set ip precedence 5
> Rack1SW1(config-pmap-c)#exi
> Rack1SW1(config-pmap-c)#exit
> Rack1SW1(config-pmap)#
> Rack1SW1(config-pmap)#exi
> Rack1SW1(config-pmap)#exit
> Rack1SW1(config)#
> Rack1SW1(config)#int fa
> Rack1SW1(config)#int fastEthernet 0/7
> Rack1SW1(config-if)#se
> Rack1SW1(config-if)#service-policy MYPOLICY ou
> Rack1SW1(config-if)#service-policy ?
> history Keep history of QoS metrics
> input Assign policy-map to the input of an interface
> output Assign policy-map to the output of an interface
> Rack1SW1(config-if)#service-policy ou
> Rack1SW1(config-if)#service-policy output MYPOLICY
> QoS: match class-map must follow match vlan in class-map VLAN.
> QoS: Policy map MYPOLICY failed vlan check
> Service Policy attachment failed
> Rack1SW1(config-if)#
> 01:08:31: %QM-4-NOT_SUPPORTED: Action 'set' is not supported for a
> policymap attached to output side.
> 01:08:31: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in
> classmap VLAN
> Rack1SW1(config-if)#
> Rack1SW1(config-if)#service-policy inpu
> Rack1SW1(config-if)#service-policy input MYPOLICY
> QoS: match class-map must follow match vlan in class-map VLAN.
> QoS: Policy map MYPOLICY failed vlan check
> Service Policy attachment failed
> Rack1SW1(config-if)#
> 01:09:34: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in
> classmap VLAN
> Rack1SW1(config-if)#
>
>
>
>
> ---------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo! Search.
>
>
> ---------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo! Search.
>
>
> ---------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo! Search.
>
>
> ---------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo!
> Search.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST