Service policy attachment is failing

From: Tandou Mohamed (dtandou@yahoo.com)
Date: Sat Feb 16 2008 - 22:23:58 ARST

Next message: Scott Morris: "RE: Finally Pass Voice Lab on first attempt"
Previous message: Jack Flash: "RE: Finally Pass Voice Lab on first attempt"
Next in thread: Sadiq Yakasai: "Re: Service policy attachment is failing"
Maybe reply: Sadiq Yakasai: "Re: Service policy attachment is failing"
Maybe reply: Tarun Pahuja: "Re: Service policy attachment is failing"
Maybe reply: Tandou Mohamed: "Re: Service policy attachment is failing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

     Hello GS,
  can someone check this errors below and let me know what's wrong ? it this an ios issue ? Please help.

  Thanks

  Mohamed

  Rack1SW1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1SW1(config)#cla
Rack1SW1(config)#class-map ma
Rack1SW1(config)#class-map match-al
Rack1SW1(config)#class-map match-all VLAN
Rack1SW1(config-cmap)#ma
Rack1SW1(config-cmap)#match vl
Rack1SW1(config-cmap)#match vlan 90
Rack1SW1(config-cmap)#exi
Rack1SW1(config-cmap)#exit
Rack1SW1(config)#polic
Rack1SW1(config)#policy-map
Rack1SW1(config)#policy-map MYPOLICY
Rack1SW1(config)#policy-map MYPOLICY
Rack1SW1(config-pmap)#cla
Rack1SW1(config-pmap)#class VLAN
Rack1SW1(config-pmap-c)#se
Rack1SW1(config-pmap-c)#set ip pr
Rack1SW1(config-pmap-c)#set ip precedence 5
Rack1SW1(config-pmap-c)#exi
Rack1SW1(config-pmap-c)#exit
Rack1SW1(config-pmap)#
Rack1SW1(config-pmap)#exi
Rack1SW1(config-pmap)#exit
Rack1SW1(config)#
Rack1SW1(config)#int fa
Rack1SW1(config)#int fastEthernet 0/7
Rack1SW1(config-if)#se
Rack1SW1(config-if)#service-policy MYPOLICY ou
Rack1SW1(config-if)#service-policy ?
  history Keep history of QoS metrics
  input Assign policy-map to the input of an interface
  output Assign policy-map to the output of an interface
  Rack1SW1(config-if)#service-policy ou
Rack1SW1(config-if)#service-policy output MYPOLICY
QoS: match class-map must follow match vlan in class-map VLAN.
QoS: Policy map MYPOLICY failed vlan check
Service Policy attachment failed
Rack1SW1(config-if)#
01:08:31: %QM-4-NOT_SUPPORTED: Action 'set' is not supported for a policymap attached to output side.
01:08:31: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap VLAN
Rack1SW1(config-if)#
Rack1SW1(config-if)#service-policy inpu
Rack1SW1(config-if)#service-policy input MYPOLICY
QoS: match class-map must follow match vlan in class-map VLAN.
QoS: Policy map MYPOLICY failed vlan check
Service Policy attachment failed
Rack1SW1(config-if)#
01:09:34: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap VLAN
Rack1SW1(config-if)#




---------------------------------
  Looking for last minute shopping deals? Find them fast with Yahoo! Search.

---------------------------------
Looking for last minute shopping deals? Find them fast with Yahoo! Search.

Next message: Scott Morris: "RE: Finally Pass Voice Lab on first attempt"
Previous message: Jack Flash: "RE: Finally Pass Voice Lab on first attempt"
Next in thread: Sadiq Yakasai: "Re: Service policy attachment is failing"
Maybe reply: Sadiq Yakasai: "Re: Service policy attachment is failing"
Maybe reply: Tarun Pahuja: "Re: Service policy attachment is failing"
Maybe reply: Tandou Mohamed: "Re: Service policy attachment is failing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST