Re: Service policy attachment is failing

From: Tandou Mohamed (dtandou@yahoo.com)
Date: Mon Feb 18 2008 - 10:28:53 ARST

Next message: Tarun Pahuja: "Re: NAT on a stick doesn't work"
Previous message: Tarun Pahuja: "Re: RSPAN QUESTION -- Only for 3550"
Maybe in reply to: Tandou Mohamed: "Service policy attachment is failing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks Guys,
  i thought i was doing something wrong. Tarun thanks for the document very good read.

  Thanks,

  Tandou

Tarun Pahuja <pahujat@gmail.com> wrote:
    Tandou,
               Not all the features of Marking and classification are supported in all directions and or platforms. The supported features depend upon hardware platform, IOS installed, feature Cards, etc.

  Please have a look at the following link which does a very good comparison between features and hardware platforms:

  http://www.netcraftsmen.net/welcher/papers/qosfor6500.html

  HTH,
  Tarun

On 2/17/08, Tandou Mohamed <dtandou@yahoo.com> wrote: Hello GS,
can someone check this errors below and let me know what's wrong ? it this an ios issue ? Please help.

Thanks

Mohamed

Rack1SW1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1SW1(config)#cla
Rack1SW1(config)#class-map ma
Rack1SW1(config)#class-map match-al
Rack1SW1(config)#class-map match-all VLAN
Rack1SW1(config-cmap)#ma
Rack1SW1(config-cmap)#match vl
Rack1SW1(config-cmap)#match vlan 90
Rack1SW1(config-cmap)#exi
Rack1SW1(config-cmap)#exit
Rack1SW1(config)#polic
Rack1SW1(config)#policy-map
Rack1SW1(config)#policy-map MYPOLICY
Rack1SW1(config)#policy-map MYPOLICY
Rack1SW1(config-pmap)#cla
Rack1SW1(config-pmap)#class VLAN
Rack1SW1(config-pmap-c)#se
Rack1SW1(config-pmap-c)#set ip pr
Rack1SW1(config-pmap-c)#set ip precedence 5
Rack1SW1(config-pmap-c)#exi
Rack1SW1(config-pmap-c)#exit
Rack1SW1(config-pmap)#
Rack1SW1(config-pmap)#exi
Rack1SW1(config-pmap)#exit
Rack1SW1(config)#
Rack1SW1(config)#int fa
Rack1SW1(config)#int fastEthernet 0/7
Rack1SW1(config-if)#se
Rack1SW1(config-if)#service-policy MYPOLICY ou
Rack1SW1(config-if)#service-policy ?
history Keep history of QoS metrics
input Assign policy-map to the input of an interface
output Assign policy-map to the output of an interface
Rack1SW1(config-if)#service-policy ou
Rack1SW1(config-if)#service-policy output MYPOLICY
QoS: match class-map must follow match vlan in class-map VLAN.
QoS: Policy map MYPOLICY failed vlan check
Service Policy attachment failed
Rack1SW1(config-if)#
01:08:31: %QM-4-NOT_SUPPORTED: Action 'set' is not supported for a policymap attached to output side.
01:08:31: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap VLAN
Rack1SW1(config-if)#
Rack1SW1(config-if)#service-policy inpu
Rack1SW1(config-if)#service-policy input MYPOLICY
QoS: match class-map must follow match vlan in class-map VLAN.
QoS: Policy map MYPOLICY failed vlan check
Service Policy attachment failed
Rack1SW1(config-if)#
01:09:34: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap VLAN
Rack1SW1(config-if)#

---------------------------------
Looking for last minute shopping deals? Find them fast with Yahoo! Search.

Next message: Tarun Pahuja: "Re: NAT on a stick doesn't work"
Previous message: Tarun Pahuja: "Re: RSPAN QUESTION -- Only for 3550"
Maybe in reply to: Tandou Mohamed: "Service policy attachment is failing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST