From: Scott Ralph (scottralph@gmail.com)
Date: Thu Jan 24 2008 - 17:48:04 ARST
Hi
Yes I have seen version of IOS that do not have this option.
If you are using a LNS or LAC I believe you can just use the BBA-Group
command for the interface.
However I am using - Version 12.4(9)T and this command is available.
Scott
On 1/22/08, Cisco Nuts <cisconuts@hotmail.com> wrote:
>
> Hi:
>
> I am trying to configure pppoe on a router running 12.1 ios but not seeing
> the
> option to enable pppoe under the vpdn group.
>
> Has anyone experienced this?
>
> I am following this url:
>
> http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ftpppoec.html#
> wp1047663
>
> especially the section where it says: Prior to IOS Rel 12.2 (13) T
>
> It says to enable pppoe you have to first enable vpdn and configure
> protocol
> pppoe under it.
>
> So I downgraded my IOS to 12.1(27)b IP Plus and tried it but I am not
> seeing
> an option to enable pppoe under the vpdn config.
>
> router#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> 00:11:00: %SYS-5-CONFIG_I: Configured from console by console
> router(config)#vpdn enable
> router(config)#vpdn-group 1
> router(config-vpdn)#request-dialin
> router(config-vpdn-req-in)#protocol ?
> l2f Use L2F
> l2tp Use L2TP
>
> router(config)#int e0
> router(config-if)#pppoe ?
> % Unrecognized command
> router(config-if)#pppoe
>
> Is there another version below 12.2(13)T that will give me the option.
>
> Thanks.
>
>
>
> _________________________________________________________________
> Shed those extra pounds with MSN and The Biggest Loser!
> http://biggestloser.msn.com/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Scott Ralph
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:01 ARST