From: Darby Weaver (darbyweaver@yahoo.com)
Date: Thu Jan 24 2008 - 17:55:21 ARST
See I hear this all the time about extra configuration
not being a problem.
However, there are some times I think a person ought
to consider the question fully.
If a person is being asked for a certain type of
command and there are 4 nearly identical options - and
the person does all 4 of them...
Then I think a person is likely to lose these "easy"
points. Since the person clearly did not understand
the task enough to answer the task correctly.
Instead a shotgun approach was used.
I here the same things when people ask "what if I get
locked out by enabling aaa new-model"... and some
other people mention creating a profile for VTY and
CON and applying it to linee vty or the console.
I'd think if you did this you would probably violate
something somewhere unless told otherwise.
Again it likely means one does not understand the task
completely.
Just a thought.
In my mind, the CCIE Labs are asking for very explicit
answers after taking away one or more options from a
very finite number of options based on each
technology.
There may be some rare exceptions - but I ask who
wants to pass on re-grade?
Better to spend a little more time trying to fully
understand what is being asked.
--- Jason Madsen <madsen.jason@gmail.com> wrote:
> Seems as though "extra" configurations shouldn't be
> an issue if they don't
> effect your other config's. Be aware that if the
> requirement is preventing
> banners from being displayed (inverse of what you
> stated) to those
> connecting via telnet, while still having banners
> displayed for console
> connections, you would probably have to go to VTY
> line mode and execute the
> "R1(config-line)#no exec-banner" command. This
> won't effect your local
> banners, but will prevent those telnetting in from
> having a banner displayed
>
>
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a008044036d.html#wp1002212
>
> Jason
>
> On Jan 22, 2008 10:00 AM, dave dave
> <funccie@gmail.com> wrote:
>
> > Hi Expert,
> >
> > Just for an example if task say,
> > A banner message should be displayed to all user
> telnet into network
> > router
> > states that "Try for access".
> >
> > Suppose i dont know answer & configure router for
> >
> > *banner exec
> > banner incoming
> > banner login
> > banner motd*
> >
> > Can i will get the mark fo the task, as protor can
> see that i dont know
> > the
> > exact answer & i tried to solve it by giving many
> way out of which only
> > one
> > is correct & all other wrong.
> >
> >
> > In short i have answer the question by giving many
> sily answer.
> >
> > Regards
> > Dave
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:01 ARST