Question regarding PPPoE prior to IOS 12.2 rel

From: Cisco Nuts (cisconuts@hotmail.com)
Date: Tue Jan 22 2008 - 14:25:47 ARST

• Next message: dave dave: "Plaese help : full marks or zero marks?"
• Previous message: Andris Zarins: "RE: CCIE R/S and Security - VTY Access-Class"
• Next in thread: Scott Ralph: "Re: Question regarding PPPoE prior to IOS 12.2 rel"
• Maybe reply: Scott Ralph: "Re: Question regarding PPPoE prior to IOS 12.2 rel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi:

I am trying to configure pppoe on a router running 12.1 ios but not seeing the
option to enable pppoe under the vpdn group.

Has anyone experienced this?

I am following this url:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ftpppoec.html#
wp1047663

especially the section where it says: Prior to IOS Rel 12.2 (13) T

It says to enable pppoe you have to first enable vpdn and configure protocol
pppoe under it.

So I downgraded my IOS to 12.1(27)b IP Plus and tried it but I am not seeing
an option to enable pppoe under the vpdn config.

router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
00:11:00: %SYS-5-CONFIG_I: Configured from console by console
router(config)#vpdn enable
 router(config)#vpdn-group 1
router(config-vpdn)#request-dialin
router(config-vpdn-req-in)#protocol ?
  l2f Use L2F
  l2tp Use L2TP

    router(config)#int e0
router(config-if)#pppoe ?
% Unrecognized command
router(config-if)#pppoe

Is there another version below 12.2(13)T that will give me the option.

Thanks.

• Next message: dave dave: "Plaese help : full marks or zero marks?"
• Previous message: Andris Zarins: "RE: CCIE R/S and Security - VTY Access-Class"
• Next in thread: Scott Ralph: "Re: Question regarding PPPoE prior to IOS 12.2 rel"
• Maybe reply: Scott Ralph: "Re: Question regarding PPPoE prior to IOS 12.2 rel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST