From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Tue Jan 08 2008 - 03:19:22 ARST
As far as point 2, only if you're running Windows! I run a full IEWB
topology on a single OS X box with LOTS of CPU to spare! Others do likewise
with Linux...
-----Original Message-----
From: Goyal, Avdhesh [mailto:Avdhesh.Goyal@ps.net]
Sent: Monday, January 07, 2008 10:02 PM
To: Scott Vermillion; uyota oyearone; CCIE
Subject: RE: dynamips Nightmare, HELP!!
You are right. In fact It's a amazing tool. Only two drawbacks
1. Not useful for advanced switching stuff.
2. Need atleast two PCs to run complete CCIE routing lab.
thx
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Vermillion
Sent: Tuesday, January 08, 2008 8:25 AM
To: 'uyota oyearone'; 'CCIE'
Subject: RE: dynamips Nightmare, HELP!!
That got pretty screwed up in translation. Can you please try to
re-post?
Or explain in your text what's going on? Also, the
http://7200emu.hacki.at/ forums are a great resource for
Dynamips/Dynagen help. Lastly, Dynamips/Dynagen is always an initial
investment in time; it does take some effort to get over those initial
humps. Once you figure it all out, though, you're left wondering what
the big friggin deal was! ;~)
Thx...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
uyota oyearone
Sent: Monday, January 07, 2008 6:31 PM
To: CCIE
Subject: dynamip Nightmare, HELP!!
Hi Group,
Am not a Newbie in configuring Live Routers & Switches, but i began been
playing around with dynamipsof late, and am facing some frustrating
issues wit this badboy!
Here is a snapshot (using IEWB Dy. Topology)...
====#sh ip route
C 155.1.146.0 is directly connected, EthernetC 155.1.4.0 is
directly connected, Ethernet0/B 155.1.5.0 [200/0] via 155.1.45.5,
01:15:11C 155.1.45.0 is directly connected, Serial1/1B
155.1.37.0
[20/0] via 155.1.146.1, 00:48:04 4.0.0.0/32 is subnetted, 1 subnetsC
4.4.4.4 is directly connected, Loopback0
#sh ip bgp sumNeighbor V AS MsgRcvd MsgSent TblVer InQ OutQ
Up/Down State/PfxRcd155.1.45.5 4 1 85 83 12
0
0 01:14:55 1155.1.146.1 4 2 119 115 12 0
0
01:34:09 1
#sh ip bgp Network Next Hop Metric LocPrf Weight
Path*>i155.1.5.0/24 155.1.45.5 0 100 0 i*>
155.1.37.0/24 155.1.146.1 0 2 i
====R4#ping 155.1.37.3
Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to
155.1.37.3, timeout is 2 seconds:.....Success rate is 0 percent (0/5)
R4#ping 155.1.5.5 Type escape sequence to abort.Sending 5, 100-byte ICMP
Echos to 155.1.5.5, timeout is 2 seconds:!!!!!Success rate is 100
percent (5/5), round-trip min/avg/max = 28/47/96 ms======
155.1.37.0/24 is 2 hops away.-- fails155.1.5.5/24 is one hop away. -
works fine ====
There are no ACL blocking it, all links are fine, traceroute does not
help cos it doesntexit the first hope,
I did this same Configurations on a real Device and it worked fine. Did
anyone experience similar issue on Dynamips???How did u fix it ???
Thanks
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST