From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Tue Jan 08 2008 - 00:54:53 ARST
That got pretty screwed up in translation. Can you please try to re-post?
Or explain in your text what's going on? Also, the http://7200emu.hacki.at/
forums are a great resource for Dynamips/Dynagen help. Lastly,
Dynamips/Dynagen is always an initial investment in time; it does take some
effort to get over those initial humps. Once you figure it all out, though,
you're left wondering what the big friggin deal was! ;~)
Thx...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
uyota oyearone
Sent: Monday, January 07, 2008 6:31 PM
To: CCIE
Subject: dynamip Nightmare, HELP!!
Hi Group,
Am not a Newbie in configuring Live Routers & Switches, but i began been
playing around with dynamipsof late, and am facing some frustrating issues
wit
this badboy!
Here is a snapshot (using IEWB Dy. Topology)...
====#sh ip route
C 155.1.146.0 is directly connected, EthernetC 155.1.4.0 is
directly connected, Ethernet0/B 155.1.5.0 [200/0] via 155.1.45.5,
01:15:11C 155.1.45.0 is directly connected, Serial1/1B
155.1.37.0
[20/0] via 155.1.146.1, 00:48:04 4.0.0.0/32 is subnetted, 1 subnetsC
4.4.4.4 is directly connected, Loopback0
#sh ip bgp sumNeighbor V AS MsgRcvd MsgSent TblVer InQ OutQ
Up/Down State/PfxRcd155.1.45.5 4 1 85 83 12 0
0 01:14:55 1155.1.146.1 4 2 119 115 12 0
0
01:34:09 1
#sh ip bgp Network Next Hop Metric LocPrf Weight
Path*>i155.1.5.0/24 155.1.45.5 0 100 0 i*>
155.1.37.0/24 155.1.146.1 0 2 i
====R4#ping 155.1.37.3
Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 155.1.37.3,
timeout is 2 seconds:.....Success rate is 0 percent (0/5)
R4#ping 155.1.5.5
Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 155.1.5.5,
timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip
min/avg/max = 28/47/96 ms======
155.1.37.0/24 is 2 hops away.-- fails155.1.5.5/24 is one hop away. - works
fine
====
There are no ACL blocking it, all links are fine, traceroute does not help
cos
it doesntexit the first hope,
I did this same Configurations on a real Device and it worked fine. Did
anyone
experience similar issue on Dynamips???How did u fix it ???
Thanks
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST