From: uyota oyearone (spycharlies@hotmail.com)
Date: Tue Jan 08 2008 - 03:33:40 ARST
Hardware is not the issue. I am using a single quad Pc /3MB Ram, running
Server 2003. with full internetworkExpert, toplology,i get max.18% CPU Usage
on a good idlepc value.
hmmm...mayb i shld try intalling dynamip on Xp instead of Server 2003.
Hopefully it helps, cos i know configuration is not the issue here.
Uyota
> From: scott_ccie_list@it-ag.com> To: Avdhesh.Goyal@ps.net;
spycharlies@hotmail.com; ccielab@groupstudy.com> Subject: RE: dynamips
Nightmare, HELP!!> Date: Mon, 7 Jan 2008 22:19:22 -0700> > As far as point 2,
only if you're running Windows! I run a full IEWB> topology on a single OS X
box with LOTS of CPU to spare! Others do likewise> with Linux...> >
-----Original Message-----> From: Goyal, Avdhesh [mailto:Avdhesh.Goyal@ps.net]
> Sent: Monday, January 07, 2008 10:02 PM> To: Scott Vermillion; uyota
oyearone; CCIE> Subject: RE: dynamips Nightmare, HELP!!> > You are right. In
fact It's a amazing tool. Only two drawbacks> > 1. Not useful for advanced
switching stuff.> 2. Need atleast two PCs to run complete CCIE routing lab.> >
thx > > -----Original Message-----> From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of> Scott Vermillion> Sent: Tuesday,
January 08, 2008 8:25 AM> To: 'uyota oyearone'; 'CCIE'> Subject: RE: dynamips
Nightmare, HELP!!> > That got pretty screwed up in translation. Can you please
try to> re-post?> Or explain in your text what's going on? Also, the>
http://7200emu.hacki.at/ forums are a great resource for> Dynamips/Dynagen
help. Lastly, Dynamips/Dynagen is always an initial> investment in time; it
does take some effort to get over those initial> humps. Once you figure it all
out, though, you're left wondering what> the big friggin deal was! ;~)> >
Thx...> > -----Original Message-----> From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of> uyota oyearone> Sent: Monday,
January 07, 2008 6:31 PM> To: CCIE> Subject: dynamip Nightmare, HELP!!> > Hi
Group,> > Am not a Newbie in configuring Live Routers & Switches, but i began
been> playing around with dynamipsof late, and am facing some frustrating>
issues wit this badboy!> > Here is a snapshot (using IEWB Dy. Topology)...> >
====#sh ip route> C 155.1.146.0 is directly connected, EthernetC 155.1.4.0 is>
directly connected, Ethernet0/B 155.1.5.0 [200/0] via 155.1.45.5,> 01:15:11C
155.1.45.0 is directly connected, Serial1/1B> 155.1.37.0> [20/0] via
155.1.146.1, 00:48:04 4.0.0.0/32 is subnetted, 1 subnetsC> 4.4.4.4 is directly
connected, Loopback0> #sh ip bgp sumNeighbor V AS MsgRcvd MsgSent TblVer InQ
OutQ> Up/Down State/PfxRcd155.1.45.5 4 1 85 83 12> 0> 0 01:14:55 1155.1.146.1
4 2 119 115 12 0> 0> 01:34:09 1> #sh ip bgp Network Next Hop Metric LocPrf
Weight> Path*>i155.1.5.0/24 155.1.45.5 0 100 0 i*>> 155.1.37.0/24 155.1.146.1
0 2 i> > ====R4#ping 155.1.37.3> Type escape sequence to abort.Sending 5,
100-byte ICMP Echos to> 155.1.37.3, timeout is 2 seconds:.....Success rate is
0 percent (0/5)> R4#ping 155.1.5.5 Type escape sequence to abort.Sending 5,
100-byte ICMP> Echos to 155.1.5.5, timeout is 2 seconds:!!!!!Success rate is
100> percent (5/5), round-trip min/avg/max = 28/47/96 ms======> 155.1.37.0/24
is 2 hops away.-- fails155.1.5.5/24 is one hop away. -> works fine ====> >
There are no ACL blocking it, all links are fine, traceroute does not> help
cos it doesntexit the first hope,> > I did this same Configurations on a real
Device and it worked fine. Did> anyone experience similar issue on
Dynamips???How did u fix it ???> Thanks> >
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST