From: Chan Hong (chan_hong33@yahoo.com)
Date: Tue Dec 11 2007 - 07:32:32 ART
Dear Amin
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hbr_r/b
r_a1h.htm#wp1066486
without specify the interface in the command, I think it
just forward/discard the frame in the bridge group.
If specify the interface,
although the Cisco Doc said forward means "Frame sent from or destined to the
specified address is forwarded as appropriate. ", my testing result is that
the frame with the matched destination mac address will forward to the
configured interface.
eg.,
Before configure "bridge 1 address 000e.d786.d2a0
forward fa0/1"
r2#sh bridge
Total of 300 station blocks, 298 free
Codes: P -
permanent, S - self
Bridge Group 1:
Address Action Interface
Age RX count TX count
000e.d786.c9e1 forward FastEthernet0/1 0
29 54
000e.d786.d2a0 forward FastEthernet0/0 0 5
5 <--------
After configured:
r2#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
r2(config)#bridge 1 address 000e.d786.d2a0 forward
fa0/1
r2(config)#
r2#s
*Mar 2 06:09:25.064: %SYS-5-CONFIG_I: Configured from
console by consoleh bri
Total of 300 station blocks, 298 free
Codes: P -
permanent, S - self
Bridge Group 1:
Address Action Interface
Age RX count TX count
000e.d786.c9e1 forward FastEthernet0/1 0
29 54
000e.d786.d2a0 forward FastEthernet0/1 P 5
5 <------
r2#
Regards
Howard
----- 6l%s-l%s ----
1H%s$H!R amin
<amin@axizo.com>
&,%s$H ccielab@groupstudy.com
6G0e$i4A!R 2007 &~ 12$k 11 $i
,P4A$G $U$H 2:49:41
%DCD!G What would be the effect of these commands on the
members of this bridge?
Dear Experts,
What would be the effect of these
commands on the members of this bridge?
Bridge 1 acquire
Bridge 1 address
2222.2222.2222 forward
Bridge 1 address 4444.4444.4444 forward
Regards,
Amin
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST