From: Mohammad Tawfiq Dawod (www.engineer@gmail.com)
Date: Fri Nov 30 2007 - 13:37:33 ART
The messages indicates objections on 2 things: using match vlan and applying
the service-policy on the egress direction of the interfaces.
But why and how to match a vlan?
On 11/30/07, Mohammad Tawfiq Dawod <www.engineer@gmail.com> wrote:
>
>
> on Cat 3550: When trying to mtach vlan , set ip precedence and apply it on
> egress of interface, it did not work...
> any idea what is wrong ?
> Please see below:
>
>
>
> *class-map A
> match vlan 87
> exit
>
> policy-map A
> class A
> set ip precedence 4
>
> int fas 0/13
> service-policy out A
> *QoS: match class-map must follow match vlan in class-map A.
> QoS: Policy map A failed vlan check
> Service Policy attachment failed
> -if
> 06:15:05: %QM-4-NOT_SUPPORTED: Action 'set' is not supported for a
> policymap attached to output side.
> 06:15:05: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in
> classmap A
>
> Best Regards,
> Moe
-- Best Regards, Mohammad
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:32 ART