From: Mohammad Tawfiq Dawod (www.engineer@gmail.com)
Date: Fri Nov 30 2007 - 12:38:29 ART
on Cat 3550: When trying to mtach vlan , set ip precedence and apply it on
egress of interface, it did not work...
any idea what is wrong ?
Please see below:
*class-map A
match vlan 87
exit
policy-map A
class A
set ip precedence 4
int fas 0/13
service-policy out A
*QoS: match class-map must follow match vlan in class-map A.
QoS: Policy map A failed vlan check
Service Policy attachment failed
-if
06:15:05: %QM-4-NOT_SUPPORTED: Action 'set' is not supported for a policymap
attached to output side.
06:15:05: %QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap
A
Best Regards,
Moe
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:32 ART