From: Mounir Mohamed (mounir.ccieisa@gmail.com)
Date: Thu Nov 29 2007 - 06:47:50 ART
> Dear All,
>
>
>
> I get a little confused while read the below URL in Cisco DOC-CD, so
> please correct me.
>
>
>
> Now UDLD normal mode only detect the misconnected port (Fiber-Optic Only),
> While UDLD Aggressive mode can detect Misconnected port (Fiber and UTP) also
> this mode can detect one way traffic (One side send but not received), SO
> from now on if we need to apply UDLD on Ethernet-UTP we must use UDLD
> Aggressive mode ONLY and not globally (We must use it on the interface
> itself)
>
>
>
> Finally
>
>
>
> Enable UDLD normal mode (default) globally only effect Fiber interfaces
> (For Example G0/1 and G0/2 on 3560)
>
> Enable UDLD Aggressive mode globally also only effect fiber interfaces
>
>
>
> Enable UDLD Normal mode under the interface only effect fiber interfaces.
>
> Enable UDLD Aggressive mode under the interface effect Fiber and UTP with
> the above options (One way traffic and Misconnected ports)
>
>
>
> *Correct!!!!!!!!!!!!!!!*
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12240se/scg/swudld.htm
>
> --
> Best Regards,
> Mounir Mohamed
>
-- Best Regards, Mounir Mohamed
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART