From: Mounir Mohamed (mounir.ccieisa@gmail.com)
Date: Tue Nov 27 2007 - 06:11:50 ART
Dear All,
I get a little confused while read the below URL in Cisco DOC-CD, so please
correct me.
Now UDLD normal mode only detect the misconnected port (Fiber-Optic Only),
While UDLD Aggressive mode can detect Misconnected port (Fiber and UTP) also
this mode can detect one way traffic (One side send but not received), SO
from now on if we need to apply UDLD on Ethernet-UTP we must use UDLD
Aggressive mode ONLY and not globally (We must use it on the interface
itself)
Finally
Enable UDLD normal mode (default) globally only effect Fiber interfaces (For
Example G0/1 and G0/2 on 3560)
Enable UDLD Aggressive mode globally also only effect fiber interfaces
Enable UDLD Normal mode under the interface only effect fiber interfaces.
Enable UDLD Aggressive mode under the interface effect Fiber and UTP with
the above options (One way traffic and Misconnected ports)
*Correct!!!!!!!!!!!!!!!*
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12240se/scg/swudld.htm
-- Best Regards, Mounir Mohamed
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART