From: steveaggie@gmail.com
Date: Mon Nov 26 2007 - 23:36:18 ART
I am trying to set up the Auto-RP scenario.
The connection looks like this:
R2----(FR)------R3-------(FR)-------R5
R3 has separate physical interfaces for each frame relay connection.
R3 is set up as the only C-RP
R2 is setup as the mapping agent
R5 has a static join configured on it's E0/0 interface for group
226.26.26.26
My problem is that R5 does not receive the RP mapping announcement from R2.
I have a feeling this has to do with some multicast limitation of Frame
Relay, but I can't figure out what. I have tried enabling PIM NBMA-mode on
all of the interfaces.
If I configure R5 with a static RP address of R3, then everything works
fine. (i.e. I can ping the multicast group from Fa0/0 of R2)
Thanks
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART