From: Kim teu (kim.teu@gmail.com)
Date: Mon Nov 26 2007 - 23:58:37 ART
Do you have pim sparse-den mode enable on all the FR interfaces? Are they
all neighbored up?
Kim
On 11/26/07, steveaggie@gmail.com <steveaggie@gmail.com> wrote:
>
> I am trying to set up the Auto-RP scenario.
>
>
>
> The connection looks like this:
>
>
>
> R2----(FR)------R3-------(FR)-------R5
>
>
>
> R3 has separate physical interfaces for each frame relay connection.
>
> R3 is set up as the only C-RP
>
> R2 is setup as the mapping agent
>
> R5 has a static join configured on it's E0/0 interface for group
> 226.26.26.26
>
>
>
> My problem is that R5 does not receive the RP mapping announcement from
> R2.
> I have a feeling this has to do with some multicast limitation of Frame
> Relay, but I can't figure out what. I have tried enabling PIM NBMA-mode
> on
> all of the interfaces.
>
>
>
> If I configure R5 with a static RP address of R3, then everything works
> fine. (i.e. I can ping the multicast group from Fa0/0 of R2)
>
>
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:31 ART