From: Bob Sinclair (bob@bobsinclair.net)
Date: Wed Nov 21 2007 - 23:44:43 ART
Gregory Gombas wrote:
> I have a pretty simple policy map configured to match all IP traffic
> and set dscp to AF11, yet no packets are matching the policy even
> though I'm generating traffic. Any ideas?
>
>
>
> CAT1#show policy-map int fa0/2
>
>
Hi Gregory,
Though available, this command is not supported on the CAT3550. You
will always get zero counters in my experience. Try this:
show mls qos interface f0/2 statistics
You can break out the numbers by DSCP value using the interface-level
"monitor" command. sometimes it is easier to do the verification on a
router interface.
Hth,
--Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART