From: Olugbenga Adanlawo (gbengaadan@hotmail.com)
Date: Fri Nov 23 2007 - 05:59:31 ART
Hi Gregory,
you have to change the sdm template for the C3550 and reload it for the
policy map to work.
Am not sure the actual template to use but i think is extended. (sdm command
at the global config will give you the options)
Regards
--------------------------------------------------
From: "Gregory Gombas" <ggombas@gmail.com>
Sent: Thursday, November 22, 2007 2:30 AM
To: "Cisco certification" <ccielab@groupstudy.com>
Subject: Policy map on Cat3550 not working?
> I have a pretty simple policy map configured to match all IP traffic
> and set dscp to AF11, yet no packets are matching the policy even
> though I'm generating traffic. Any ideas?
>
> mls qos
>
> ip access-list extended ALL-IP-TRAFFIC
> permit ip any any
>
> class-map match-all PERMIT-IP
> match access-group name ALL-IP-TRAFFIC
>
> policy-map QOS
> class PERMIT-IP
> set dscp af11
>
> interface FastEthernet0/2
> service-policy input QOS
>
> CAT1#show policy-map int fa0/2
> FastEthernet0/2
>
> Service-policy input: QOS
>
> Class-map: PERMIT-IP (match-all)
> 0 packets, 0 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: access-group name ACL-ALL-IP-TRAFFIC
>
> Class-map: class-default (match-any)
> 0 packets, 0 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: any
> 0 packets, 0 bytes
> 5 minute rate 0 bps
> CAT1#
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART