From: ruth@mycomputer.co.uk
Date: Sat Oct 20 2007 - 14:45:17 ART
Narbik - can you suggest a 'good starter for 10' RFC(s) for Multicast? There
seem to be so many!
----- Original Message ----
From: Narbik Kocharians
<narbikk@gmail.com>
To: Vineesh Viswanath Iyer <vinunath@gmail.com>
Cc:
ccielab@groupstudy.com
Sent: Saturday, 20 October, 2007 6:20:13 PM
Subject:
Re: Router - Bandwidth use
Read this, its good for you, it lowers your blood
pressure.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hif_r/i
nt_a1h.htm#wp1198046
On 10/20/07, Narbik Kocharians <narbikk@gmail.com>
wrote:
>
> It'll effect your routing protocol's decision.
>
> On 10/20/07,
Vineesh Viswanath Iyer <vinunath@gmail.com> wrote:
> >
> > hi
> >
> > please
help me understand this scenario
> >
> > 2 routers connected via 8mbps FR
> >
> > if we configure a less bandwidth , say 2 mbps in the interfeace config
> >
mode
> > , will that affect the actual pipe , or is that a parameter to tweak
the
> > routing protocol ?
> >
> > will i be able to use the 8mb bandwidth in
this situation ?
> >
> > Thanks and Regards
> >
> > Vinu
> >
> >
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:17 ART