From: Navid Daghighi (daghighi.navid@free.fr)
Date: Fri Oct 19 2007 - 04:31:12 ART
Thanks Alexei,
That is an interesting solution.
I wonder if, for the exam, it would be equal to set the client-id or
look for it without modifying it...
Alexei Monastyrnyi a C)crit :
> Navid,
> you set it up on a client side, any value you wish in interface
> configuration mode for your DHCP interface by *"*ip dhcp client*
> *client-id hex 123abc" for instance.
>
> Then you do a manual binding on a DHCP server side for this value.
>
> *ip dhcp pool your-dhcp-client-router*
>
> *host 1.1.1.1 255.255.255.0*
>
> *client-identifier abc123*
>
> *etc*
>
>
>
> HTH,
> A.*
> *
> Navid Daghighi wrote:
>> Hi,
>>
>> How can I check what should be the parameter that I should type after
>> the command :
>>
>> hardware-address (I tried the MAC address alone, it did not work)
>> or
>> client-identifier (I tried the MAC address prefixed by 01 + moving
>> the 'dots' by 2 digits to the right, it did not work)
>>
>> Thanks,
>> Navid
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:17 ART