From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Oct 18 2007 - 19:08:26 ART
Navid,
you set it up on a client side, any value you wish in interface
configuration mode for your DHCP interface by *"*ip dhcp client*
*client-id hex 123abc" for instance.
Then you do a manual binding on a DHCP server side for this value.
*ip dhcp pool your-dhcp-client-router*
*host 1.1.1.1 255.255.255.0*
*client-identifier abc123*
*etc*
HTH,
A.*
*
Navid Daghighi wrote:
> Hi,
>
> How can I check what should be the parameter that I should type after
> the command :
>
> hardware-address (I tried the MAC address alone, it did not work)
> or
> client-identifier (I tried the MAC address prefixed by 01 + moving
> the 'dots' by 2 digits to the right, it did not work)
>
> Thanks,
> Navid
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:16 ART