From: Mounir Mohamed (mounir.mohamed@gmail.com)
Date: Tue Oct 02 2007 - 13:54:05 ART
I think we also can use Static-RP pointing to ourselfs loopbacks to prevent
DM-Fallback in case of RP failure. Sure if the question doesn't restract it
--> Right?
On 10/1/07, Saul Arjona <saul.arjona.bueno@gmail.com> wrote:
>
> There is no default mode for pim. Now the choice you make depends on the
> tasks, if there is an RP you will need sparse mode but if there are not
> RPs
> defined you will need dense mode. If you enable sparse-dense it will use
> sparse for the groups that have RP defined and dense for the ones that
> not.
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/iprmc_r/ip3_i2g.htm#wp1080424
>
> Regards
> -Saul
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Best Reagrds, Mounir Mohamed
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:11 ART