Re: default multicast pim mode

From: Saul Arjona (saul.arjona.bueno@gmail.com)
Date: Mon Oct 01 2007 - 03:38:12 ART

• Next message: fadel lubbos: "Rack Rentals"
• Previous message: subodh.rawat@wipro.com: "RE: Access List"
• Next in thread: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Bob Sinclair: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Herbert Maosa: "Re: default multicast pim mode"
• Maybe reply: Herbert Maosa: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Herbert Maosa: "Re: default multicast pim mode"
• Maybe reply: John Jones: "Re: default multicast pim mode"
• Maybe reply: Mounir Mohamed: "Re: default multicast pim mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

There is no default mode for pim. Now the choice you make depends on the
tasks, if there is an RP you will need sparse mode but if there are not RPs
defined you will need dense mode. If you enable sparse-dense it will use
sparse for the groups that have RP defined and dense for the ones that not.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/iprmc_r/ip3_i2g.htm#wp1080424

Regards
-Saul

• Next message: fadel lubbos: "Rack Rentals"
• Previous message: subodh.rawat@wipro.com: "RE: Access List"
• Next in thread: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Bob Sinclair: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Herbert Maosa: "Re: default multicast pim mode"
• Maybe reply: Herbert Maosa: "Re: default multicast pim mode"
• Maybe reply: Rich Collins: "Re: default multicast pim mode"
• Maybe reply: Herbert Maosa: "Re: default multicast pim mode"
• Maybe reply: John Jones: "Re: default multicast pim mode"
• Maybe reply: Mounir Mohamed: "Re: default multicast pim mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:11 ART