From: Gregory Gombas (ggombas@gmail.com)
Date: Fri Sep 21 2007 - 11:36:50 ART
Hey are you sure they are not using some sort of dot1q or L2 tunneling?
On 9/20/07, Theo M <theorack@gmail.com> wrote:
> Hello,
>
> What's up with the Fa0/21 as an L3 interface on SW1, in the Core Lab1
> diagram ?!?
>
> By looking in the hardware connectivity specifications, it should be
> connected to Fa0/21 on SW4.
> The diagram for this lab shows SW1::Fa0/21 as an L3 interface directly
> connected to R5,
> but in fact that interface is part of the EtherChannel that we have
> configured between SW1 and SW4,
> even per the Solution Guide !
>
> The initial config for SW1 also configures this as an L3 interfaces.
>
> Can somebody clear this up, please ?
>
> I hope it's not the coffeine, I double-checked the physical connectivity
> specs and SW1::Fa0/21 isn't even
> connected to anything.
>
> I'll use SW1::Vlan57 instead, for the moment ( I suspect a typo).
>
> --
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:15 ART