From: Theo M (theorack@gmail.com)
Date: Thu Sep 20 2007 - 13:54:43 ART
Hello,
What's up with the Fa0/21 as an L3 interface on SW1, in the Core Lab1
diagram ?!?
By looking in the hardware connectivity specifications, it should be
connected to Fa0/21 on SW4.
The diagram for this lab shows SW1::Fa0/21 as an L3 interface directly
connected to R5,
but in fact that interface is part of the EtherChannel that we have
configured between SW1 and SW4,
even per the Solution Guide !
The initial config for SW1 also configures this as an L3 interfaces.
Can somebody clear this up, please ?
I hope it's not the coffeine, I double-checked the physical connectivity
specs and SW1::Fa0/21 isn't even
connected to anything.
I'll use SW1::Vlan57 instead, for the moment ( I suspect a typo).
--
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:14 ART