From: cisco monster (cisco.monster@gmail.com)
Date: Sat Sep 15 2007 - 06:52:31 ART
Hello GS ,
From today morning I m getting below err and there isn't any physical port
accessible of cat3550 , plz help me :
############################################################################################
##########
File "flash:/c3550-ipservicesk9-mz.122-25.SEE1.bin" uncompressed and
installed, entry point:
0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version
12.2(25)SEE1,
RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 22-May-06 08:08 by yenanh
Image text-base: 0x00003000, data-base: 0x00DC0370
Initializing flashfs...
flashfs[1]: 3 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 7133696
flashfs[1]: Bytes available: 8865280
flashfs[1]: flashfs fsck took 9 seconds.
flashfs[1]: Initialization complete.
...done Initializing flashfs.
POST: CPU Buffer Tests : Begin
POST: CPU Buffer Tests : End, Status Passed
POST: CPU Interface Tests : Begin
POST: CPU Interface Tests : End, Status Passed
POST: Switch Core Tests : Begin
POST: Switch Core Tests : End, Status Passed
POST: CPU Interface 2nd Stage Tests : Begin
POST: CPU Interface 2nd Stage Tests : End, Status Passed
POST: CAM Subsystem Tests : Begin
POST: CAM Subsystem Tests : End, Status Passed
POST: Ethernet Controller Tests : Begin
Failed data line test
(3). <------
whats is this , i think problem is here ...
addr=0x00000,sent=0x10000000 recv=0x00
POST: Ethernet Controller Tests : End, Status Passed
INIT: failed satellites initialization
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco WS-C3550-24 (PowerPC) processor (revision H0) with 65526K/8192K bytes
of memory.
Processor board ID CAT0716X0C9
Last reset from warm-reset
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
Ethernet-controller 3 failed POST
POST error status : external RAM test failed
Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
The password-recovery mechanism is enabled.
384K bytes of flash-simulated NVRAM.
Base ethernet MAC Address: 00:0C:CE:40:7A:80
Motherboard assembly number: 73-5700-10
Power supply part number: 34-0966-02
Motherboard serial number: CAT071506NT
Power supply serial number: LIT0709001T
Model revision number: H0
Motherboard revision number: A0
Model number: WS-C3550-24-SMI
System serial number: CAT0716X0C9
!!! WARNING: The switch is not usable !!!
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]
Is hardware failure message or software , bcoz i have tried another IOS but
getting same result ,
Switch#sh ip interface brief
Interface IP-Address OK? Method Status
Protocol
Vlan1 unassigned YES unset administratively down down
Switch#
Regds
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART