From: Sadiq Yakasai (sadiqtanko@gmail.com)
Date: Wed Aug 22 2007 - 12:23:15 ART
Hi guys,
Please can someone clarify a confusion I have got here.
I configured a static RP entry for a mcast network, and I am seeing
the RP to groups mapping information through out the MCast network. Is
this normal behaviour please?
I was expecting not to see this since I am not using any auto group to
RP mapping, nor using a mapping agent to dissiminate the RP
information throughout the MCast routing domain.
here is an excerp from my config please:
(*, 228.28.28.28), 00:09:59/00:02:11, RP 150.1.2.2, flags: SJCL
Incoming interface: GigabitEthernet0/1, RPF nbr 132.1.17.1
Outgoing interface list:
Vlan783, Forward/Sparse, 00:09:59/00:02:11
(*, 224.0.1.40), 00:09:59/00:02:30, RP 150.1.2.2, flags: SJPCL
Incoming interface: GigabitEthernet0/1, RPF nbr 132.1.17.1
Outgoing interface list: Null
SW1#sh run | i pim
ip pim sparse-mode
ip pim sparse-mode
ip pim rp-address 150.1.2.2
Any comments wld b appreciated please.
Thanks
Sadiq
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART