Re: (*, 224.0.1.40) entry for a static RP

From: Toh Soon, Lim (tohsoon28@gmail.com)
Date: Thu Aug 23 2007 - 07:12:29 ART

• Next message: sirus MOGHADASIAN: "OSPF Adv Tech Labs, problem:strange area range command issue"
• Previous message: Sadiq Yakasai: "Re: (*, 224.0.1.40) entry for a static RP"
• Maybe in reply to: Sadiq Yakasai: "(*, 224.0.1.40) entry for a static RP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Sadiq,

You can do "sh ip igmp int". You'll notice the MA joins to group
224.0.1.39and the other PIM-SM routers join to group
224.0.1.40.

I saw your reply to my Auto-RP issue over NBMA mode posting. Will try the
tunnel method as suggested by you.

Thank you.

B.Rgds,
Lim TS

On 8/23/07, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
>
> Thanks guys,
>
> I would safely assume this is normal behaviour then.
>
> I just didnt think I would see any .40/.39 groups' information if I
> wasnt using any auto rp mapping in the MCast network.
>
> Sadiq

• Next message: sirus MOGHADASIAN: "OSPF Adv Tech Labs, problem:strange area range command issue"
• Previous message: Sadiq Yakasai: "Re: (*, 224.0.1.40) entry for a static RP"
• Maybe in reply to: Sadiq Yakasai: "(*, 224.0.1.40) entry for a static RP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART