%PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)

From: Theo M (theorack@gmail.com)
Date: Fri Aug 17 2007 - 05:59:42 ART

Next message: Hash Aminu: "Re: got to love cisco"
Previous message: Marc La Porte: "Re: no PPP debug output"
Next in thread: Radioactive Frog: "Re: %PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)"
Maybe reply: Radioactive Frog: "Re: %PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)"
Maybe reply: Theo M: "Re: %PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello guys,

If anybody is wondering what that means on a WS-CBS3020-HPQ,
it simply says there in no server blade connected there, so the internal
ports
just go to errdisable.

>>> Sw-HP-Blade# 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/5, putting Gi0/5 in err-disable state 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/6, putting Gi0/6 in err-disable state 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/7, putting Gi0/7 in err-disable state 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/8, putting Gi0/8 in err-disable state Sw-HP-Blade# Sw-HP-Blade# 1d14h: %SYS-5-CONFIG_I: Configured from console by vty0 (10.101.96.2) 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/5, changed state to down 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/6, changed state to down 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to down 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/8, changed state to down Sw-HP-Blade# Sw-HP-Blade# Sw-HP-Blade#

Sw-HP-Blade#sh ver Cisco IOS Software, CBS30X0 Software (CBS30X0-LANBASE-M), Version 12.2(37)SE1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Thu 05-Jul-07 19:54 by antonino Image text-base: 0x00003000, data-base: 0x00C80000

ROM: Bootstrap program is CBS30X0 boot loader BOOTLDR: CBS30X0 Boot Loader (CBS30X0-HBOOT-M) Version 12.2(25r)SEF3, RELEASE SOFTWARE (fc1)

Sw-HP-Blade uptime is 1 day, 14 hours, 45 minutes System returned to ROM by power-on System image file is "flash:cbs30x0-lanbase-mz.122-37.SE1/cbs30x0- lanbase-mz.122-37.SE1.bin"

cisco WS-CBS3020-HPQ (PowerPC405) processor (revision D0) with 118784K/12280K bytes of memory. Processor board ID FOC1112T06K Last reset from power-on 1 Virtual Ethernet interface 1 FastEthernet interface 24 Gigabit Ethernet interfaces The password-recovery mechanism is enabled.

...

Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 24 WS-CBS3020-HPQ 12.2(37)SE1 CBS30X0-LANBASE-M

Configuration register is 0xF

Sw-HP-Blade# <<<

Next message: Hash Aminu: "Re: got to love cisco"
Previous message: Marc La Porte: "Re: no PPP debug output"
Next in thread: Radioactive Frog: "Re: %PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)"
Maybe reply: Radioactive Frog: "Re: %PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)"
Maybe reply: Theo M: "Re: %PM-4-ERR_DISABLE: ekey error detected (WS-CBS3020-HPQ)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART