From: Theo M (theorack@gmail.com)
Date: Fri Aug 17 2007 - 09:01:39 ART
Thanks for the explanation and links !!!
--On 8/17/07, Radioactive Frog <pbhatkoti@gmail.com> wrote: > > > Hi Theo, > It looks like it is a known problem: > The Gigabit Ethernet ports 1 to 16 (gibabitethernet0/1 to > gibabitethernet0/16) are internal interfaces that provide communication > between the switch and the blade server. These interfaces operate at 1000 > Mbps, full-duplex, and use the 1000BASE-X protocol. > > If the Onboard Administrator detects a physical problem between the blade > server and the switch, the Onboard Administrator changes these interfaces to > the EKEY error-disabled state. You must use the Onboard Administrator to > find the root cause of the problem, and to recover from the error-disabled > state. See the HP BladeSystem documentation at http://www.hp.com/go/bladesystem/documentation > for more information <http://www.hp.com/go/bladesystem/documentation>. > > Source: > > http://www.cisco.com/en/US/products/ps6748/products_configuration_guide_chapter09186a0080814419.html > > Frog > > On 8/17/07, Theo M <theorack@gmail.com> wrote: > > > Hello guys, > > > > If anybody is wondering what that means on a WS-CBS3020-HPQ, > > it simply says there in no server blade connected there, so the internal > > > > ports > > just go to errdisable. > > > > -- > > > > >>> > > Sw-HP-Blade# > > 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/5, putting Gi0/5 in > > err-disable state > > 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/6, putting Gi0/6 in > > > > err-disable state > > 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/7, putting Gi0/7 in > > err-disable state > > 1d14h: %PM-4-ERR_DISABLE: ekey error detected on Gi0/8, putting Gi0/8 in > > err-disable state > > Sw-HP-Blade# > > Sw-HP-Blade# > > 1d14h: %SYS-5-CONFIG_I: Configured from console by vty0 (10.101.96.2) > > 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/5, changed state to > > down > > 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/6, changed state to > > down > > 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/7, changed state to > > down > > 1d14h: %LINK-3-UPDOWN: Interface GigabitEthernet0/8, changed state to > > down > > Sw-HP-Blade# > > Sw-HP-Blade# > > Sw-HP-Blade# > > > > Sw-HP-Blade#sh ver > > Cisco IOS Software, CBS30X0 Software (CBS30X0-LANBASE-M), Version 12.2 > > (37)SE1, > > RELEASE SOFTWARE (fc1) > > Copyright (c) 1986-2007 by Cisco Systems, Inc. > > Compiled Thu 05-Jul-07 19:54 by antonino > > Image text-base: 0x00003000, data-base: 0x00C80000 > > > > ROM: Bootstrap program is CBS30X0 boot loader > > BOOTLDR: CBS30X0 Boot Loader (CBS30X0-HBOOT-M) Version 12.2(25r)SEF3, > > RELEASE SOFTWARE (fc1) > > > > Sw-HP-Blade uptime is 1 day, 14 hours, 45 minutes > > System returned to ROM by power-on > > System image file is "flash:cbs30x0-lanbase-mz.122-37.SE1/cbs30x0- > > lanbase-mz.122-37.SE1.bin" > > > > cisco WS-CBS3020-HPQ (PowerPC405) processor (revision D0) with > > 118784K/12280K bytes of memory. > > Processor board ID FOC1112T06K > > Last reset from power-on > > 1 Virtual Ethernet interface > > 1 FastEthernet interface > > 24 Gigabit Ethernet interfaces > > The password-recovery mechanism is enabled. > > > > ... > > > > Switch Ports Model SW Version SW > > Image > > ------ ----- ----- ---------- > > ---------- > > * 1 24 WS-CBS3020-HPQ 12.2(37)SE1 > > CBS30X0-LANBASE-M > > > > > > Configuration register is 0xF > > > > Sw-HP-Blade# > > <<< > > > > _______________________________________________________________________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART