Re: IPV6, Using the eui-64 for ethernet segment ...

From: ccie1101 (ccie1101@gmail.com)
Date: Wed Aug 15 2007 - 01:55:00 ART

Hi Experts,
         What is the way to go about/intepret the question when it says
somemthing on this line ...

1) Configure IPv6 address 2001:192:10:X::/64 on R1's ethernet connection to
BB2.

I did this for the following :-
int fa0/0
ipv6 address 2001:192:10:1::/64 *eui-64*
!

2) Configure IPv6 on the ethernet link between R2, R5 and SW2 using the
addresses 2001:141:1:25::Y/64

Over here, the given solution was
R2 

---
int fa0/0
ipv6 address 2001:141:1:25:2/64* ....*

*         My question is that it does not seem very clear when to use the
eui-64 and when not to use it ? *
**
*         *What is the way to intepret these questions above ?

Thank you,

ccie1101.

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART