Configuration in the Lab

From: Peter Kingston (kingstonp.ccie@gmail.com)
Date: Thu Aug 09 2007 - 09:11:43 ART


Hello All,

Hopefully I am not asking to much here.

I was wondering if anyone had and Idea about losing points for extra
configuration?

Say for example you add a route-reflector-client on a neighbor that didn't
need it.

Or maybe a Next-hop-self on a neighbor that isn't requested of it

Will this lose you points? and where would the points be lost if you did the
above.
Could you lose points on all bgp section by adding this extra configuration?

Is this a proctor question? does there need to be a more direct example?

Second question:

In a route-map, redistributing connected into BGP

match interface loopback0

compared to

match ip address prefix-list loopback0

ip prefix-list loopback0 permit <loopback network>

They generate the same output, is there a preference?

Another proctor question?

Should you mark yourself wrong if the practice labs that you are doing says
a different method than you have implemented? or be lenient on yourself?

Just my general thoughts, anyones input is welcome.

-- 
Regards,

Peter Kingston Studying my CCIE



This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART