From: Eagle (ddycus@gmail.com)
Date: Thu Aug 02 2007 - 11:23:55 ART
In my experience, the access config will be ignored. The port will behave
as a trunk.
On 8/2/07, Hash Aminu <hashng@gmail.com> wrote:
>
> Hello GS
>
>
> found this in the one of the Data center center Core Switch I am working
> on,
> the port is connected to a Cisco blade server switch.
>
> what will be the motive of having access as well as trunk configs on the
> same port
>
> interface GigabitEthernet10/47
> switchport
> switchport access vlan 3
> switchport trunk encapsulation dot1q
> switchport mode trunk
> no ip address
> spanning-tree portfast
> channel-group 2 mode on
> end
>
> TIA
>
> Hash
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART