From: martijn (groupstudy@martijnj.nl)
Date: Thu Aug 02 2007 - 11:20:08 ART
pls check if you need to erase or format, like the doc says. Misscing
commands says nothing to me. cpuld be no card, bug or just wrong command....
so first analyse which kind of flash you have. then seek commands for slotx:
or flash:.
gr martijn
Formatting Procedures
Cisco recommends that you erase (Class B) or format (Class C) new compact
Flash memory cards to initialize them with either a Class B or Class C Flash
file system. This ensures proper formatting and enables the ROM monitor to
recognize and boot the Flash.
The Class B Flash file system is also known as the low end file system
(LEFS).
The Class C Flash file system is similar to the standard DOS file system.
----- Original Message -----
From: "Sadiq Yakasai" <sadiqtanko@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Thursday, August 02, 2007 3:54 PM
Subject: Re: External Linear Flash memory keeps crashing a 3640
> Hi Martin,
>
> Thanks for the message and ok (Martin, I reply to labgroup only too....)
> :-)
>
> I have actually tried all on that page, but to no avail. If u notice,
> mine are not actually the Compact Flash, but the ATA/Linear Flash,
> which I think are the older ones.
>
> The 3640 does support a "format" command... :s
>
> R3#sh ver | inc IOS
> Cisco IOS Software, 3600 Software (C3640-JS-M), Version 12.4(10), RELEASE
> SOFTW)
> R3#form?
> % Unrecognized command
> R3#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R3(config)#form?
> % Unrecognized command
> R3(config)#form
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART