Re: Dynamips MOST Recent IOS Image - Best Working

From: Kim (support@isolvesystems.com)
Date: Wed Jul 25 2007 - 22:16:46 ART


HI Antonio,
May I know what OS are you running? How many devices are turned on at the
same time?

Thanks.
Kim

On 7/25/07, Antonio Soares <amsoares@netcabo.pt> wrote:
>
> I used Dynamips intensively the last months of my preparation and i found
> the combination bellow to work very well:
>
> Main routers:
> ----------------
> [[3725]]
>
> image = C:\Program Files\Dynamips\images\c3725-adventerprisek9.124-12.bin
> ram = 128
> idlepc = 0x60a600a8
> mmap = false
>
> Switches:
> ------------
> [[3640]]
>
> image = C:\Program Files\Dynamips\images\c3640-is.124-12.bin
> ram = 128
> idlepc = 0x605bd8a0
> mmap = false
>
> Backbones:
> -------------
> [[3640]]
>
> image = C:\Program Files\Dynamips\images\c3640-js.122-40a.bin
> ram = 64
> idlepc = 0x603d4ab0
> mmap = false
>
> I have a Lenovo T60 with 2Gb of RAM running WinXP. And i configured an
> additional 2Gb of Virtual memory.
>
>
> Regards,
>
> Antonio Soares
> CCIE #18473, CCNP, CCIP
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Clay
> K Auch (clauch)
> Sent: quarta-feira, 25 de Julho de 2007 20:00
> To: ccielab@groupstudy.com
> Subject: Dynamips MOST Recent IOS Image - Best Working
>
> Hello all,
>
> I have not had much time to work with Dynamips, but the version of code I
> am
> running is shown in my show ver below. Is this the best/most recent
> version
> to run with Dynamips based on your experience?
>
> ========
>
> Cisco IOS Software, 3600 Software (C3640-JS-M), Version 12.3(14)T7,
> RELEASE
> SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupportCopyright
> (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Wed 22-Mar-06 21:46 by pwade
>
> ROM: ROMMON Emulation Microcode
> ROM: 3600 Software (C3640-JS-M), Version 12.3(14)T7, RELEASE SOFTWARE
> (fc2)
>
> L7R1 uptime is 0 minutes
> System returned to ROM by unknown reload cause - suspect
> boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19 System image file is
> "tftp://255.255.255.255/unknown"
>
> Cisco 3640 (R4700) processor (revision 0xFF) with 94208K/4096K bytes of
> memory.
> Processor board ID 00000000
> R4700 CPU at 100MHz, Implementation 33, Rev 1.2
> 1 FastEthernet interface
> 4 Serial interfaces
> DRAM configuration is 64 bits wide with parity enabled.
> 125K bytes of NVRAM.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> ========
>
> Thank you much for your time,
>
> Clay
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>

-- 
http://www.isolvesystems.com


This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART