From: Antonio Soares (amsoares@netcabo.pt)
Date: Wed Jul 25 2007 - 17:43:56 ART
I used Dynamips intensively the last months of my preparation and i found
the combination bellow to work very well:
Main routers:
----------------
[[3725]]
image = C:\Program Files\Dynamips\images\c3725-adventerprisek9.124-12.bin
ram = 128
idlepc = 0x60a600a8
mmap = false
Switches:
------------
[[3640]]
image = C:\Program Files\Dynamips\images\c3640-is.124-12.bin
ram = 128
idlepc = 0x605bd8a0
mmap = false
Backbones:
-------------
[[3640]]
image = C:\Program Files\Dynamips\images\c3640-js.122-40a.bin
ram = 64
idlepc = 0x603d4ab0
mmap = false
I have a Lenovo T60 with 2Gb of RAM running WinXP. And i configured an
additional 2Gb of Virtual memory.
Regards,
Antonio Soares
CCIE #18473, CCNP, CCIP
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Clay
K Auch (clauch)
Sent: quarta-feira, 25 de Julho de 2007 20:00
To: ccielab@groupstudy.com
Subject: Dynamips MOST Recent IOS Image - Best Working
Hello all,
I have not had much time to work with Dynamips, but the version of code I am
running is shown in my show ver below. Is this the best/most recent version
to run with Dynamips based on your experience?
========
Cisco IOS Software, 3600 Software (C3640-JS-M), Version 12.3(14)T7, RELEASE
SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright
(c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 22-Mar-06 21:46 by pwade
ROM: ROMMON Emulation Microcode
ROM: 3600 Software (C3640-JS-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
L7R1 uptime is 0 minutes
System returned to ROM by unknown reload cause - suspect
boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19 System image file is
"tftp://255.255.255.255/unknown"
Cisco 3640 (R4700) processor (revision 0xFF) with 94208K/4096K bytes of
memory.
Processor board ID 00000000
R4700 CPU at 100MHz, Implementation 33, Rev 1.2
1 FastEthernet interface
4 Serial interfaces
DRAM configuration is 64 bits wide with parity enabled.
125K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
========
Thank you much for your time,
Clay
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART