From: Ben (bmunyao@gmail.com)
Date: Fri Jul 20 2007 - 08:20:10 ART
Daniel'
I see them often too, in several titles, and Doccd. After a while, you
become good at spotting them, and reconstructing the content to learn from
it. If you haven't come across the command before, then I guess
cross-referencing is vital, to pick out typos.
Ben
On 7/20/07, Daniel Kutchin <daniel@kutchin.com> wrote:
>
> Ooops, Ben, you are right. I also make typos ;-)
>
> The point was, that you will occasionally find 2 lines mistakenly merged
> into one. Here are some examples (at least in my own copy):
>
> P.647 Example 11-20: 3rd and 7th lines should be
> redistribute eigrp 2
> passive-interface Fastethernet0/0
>
> redistribute eigrp 1
> network 192.168.4.0
>
>
> P.649 Example 11-23: last line should be
> default-metric 50
> network 192.168.3.33 0.0.0.0 area 0
>
>
> P.651 Example 11-25: last line should be <--- Juan's contribution
> default-metric 50
> network 192.168.3.33 0.0.0.0 area 0
>
>
> P.742 Example 14-16: 2nd line should be
> ip address 172.16.1.4 255.255.255.0
> ip policy route-map Woodstock
> !
>
> Here's another typo but not quite related to the above.
>
> P.790 line 16: The SNMP port in bracket should be 161 (also 162 for
> SNMPTRAP
> but not 169).
> While that section illustrates the use of TCP access lists, it is arguable
> whether SNMP uses the TCP ports 161 and 162, rather than the UDP ports 161
> and 162 also reserved for it.
>
>
> (Attention Ciscopress, we are referring to ISBN: 1-58705-202-4)
>
> Daniel
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ben
> Sent: Freitag, 20. Juli 2007 07:12
> To: Daniel Kutchin
> Cc: ccielab@groupstudy.com
> Subject: Re: [OT]: Errata on "Routing TCP/IP Vol.1 Second Ed."
>
> I can't seem to find the error in p.434 example 8-56. Could you elaborate?
>
> Ben
>
>
> On 7/20/07, Daniel Kutchin <daniel@kutchin.com> wrote:
> >
> > Juan ---
> >
> > You are likely to find a few more typos like this (e.g. see p.434,
> Example
> > 8-56). However, it doesn't diminish this good book.
> >
> > Better download the Errata here:
> >
> >
> >
>
> http://www.ciscopress.com/content/images/9781587052026/errata/1587052024_Err
> > ata.pdf
> >
> >
> > (If you would like to contribute your updates to the Errata, send your
> > corrections to feedback@ciscopress.com, quoting the ISBN and title).
> >
> > Daniel
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > jdocio
> > Sent: Donnerstag, 19. Juli 2007 17:34
> > To: ccielab@groupstudy.com
> > Subject: [OT]: Errata on "Routing TCP/IP Vol.1 Second Ed."
> >
> > Hi everyone,
> >
> > I have a stupid question...
> >
> > on page 651 (Configuring Redistribution), example 11-25 says:
> >
> > router ospf 1
> > ...
> > ...
> > default-metric 50 network 192.168.3.33 0.0.0.0 area 0
> >
> >
> > does this last command exist with this feature?.
> >
> > I tried on routers:
> > R1(config-router)#default-metric 100 net
> > ^
> > % Invalid input detected at '^' marker.
> >
> > and searched on DocCD.
> >
> >
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tirp_
> > r/rteospht.htm#wp1145921
> >
> > and I didn't the "network" option on this command. Is it an errata or I
> > haven't the right link?
> >
> >
> > Thanks for your help
> > Juan.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART