From: Daniel Kutchin (daniel@kutchin.com)
Date: Fri Jul 20 2007 - 07:11:09 ART
Ooops, Ben, you are right. I also make typos ;-)
The point was, that you will occasionally find 2 lines mistakenly merged
into one. Here are some examples (at least in my own copy):
P.647 Example 11-20: 3rd and 7th lines should be
redistribute eigrp 2
passive-interface Fastethernet0/0
redistribute eigrp 1
network 192.168.4.0
P.649 Example 11-23: last line should be
default-metric 50
network 192.168.3.33 0.0.0.0 area 0
P.651 Example 11-25: last line should be <--- Juan's contribution
default-metric 50
network 192.168.3.33 0.0.0.0 area 0
P.742 Example 14-16: 2nd line should be
ip address 172.16.1.4 255.255.255.0
ip policy route-map Woodstock
!
Here's another typo but not quite related to the above.
P.790 line 16: The SNMP port in bracket should be 161 (also 162 for SNMPTRAP
but not 169).
While that section illustrates the use of TCP access lists, it is arguable
whether SNMP uses the TCP ports 161 and 162, rather than the UDP ports 161
and 162 also reserved for it.
(Attention Ciscopress, we are referring to ISBN: 1-58705-202-4)
Daniel
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ben
Sent: Freitag, 20. Juli 2007 07:12
To: Daniel Kutchin
Cc: ccielab@groupstudy.com
Subject: Re: [OT]: Errata on "Routing TCP/IP Vol.1 Second Ed."
I can't seem to find the error in p.434 example 8-56. Could you elaborate?
Ben
On 7/20/07, Daniel Kutchin <daniel@kutchin.com> wrote:
>
> Juan ---
>
> You are likely to find a few more typos like this (e.g. see p.434, Example
> 8-56). However, it doesn't diminish this good book.
>
> Better download the Errata here:
>
>
>
http://www.ciscopress.com/content/images/9781587052026/errata/1587052024_Err
> ata.pdf
>
>
> (If you would like to contribute your updates to the Errata, send your
> corrections to feedback@ciscopress.com, quoting the ISBN and title).
>
> Daniel
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> jdocio
> Sent: Donnerstag, 19. Juli 2007 17:34
> To: ccielab@groupstudy.com
> Subject: [OT]: Errata on "Routing TCP/IP Vol.1 Second Ed."
>
> Hi everyone,
>
> I have a stupid question...
>
> on page 651 (Configuring Redistribution), example 11-25 says:
>
> router ospf 1
> ...
> ...
> default-metric 50 network 192.168.3.33 0.0.0.0 area 0
>
>
> does this last command exist with this feature?.
>
> I tried on routers:
> R1(config-router)#default-metric 100 net
> ^
> % Invalid input detected at '^' marker.
>
> and searched on DocCD.
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tirp_
> r/rteospht.htm#wp1145921
>
> and I didn't the "network" option on this command. Is it an errata or I
> haven't the right link?
>
>
> Thanks for your help
> Juan.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART