From: Chamara Peris (dimsyboy@gmail.com)
Date: Sat Jul 14 2007 - 21:12:49 ART
Hi Mike,
I want to use 1841 with this situation.
Fa/0 (Lan 192.168.xx.xx)
Fa/1 ( Routed public ip's)
Wic-it (ISP link 1, Serial, BGP private AS)
Hwic-4esw or smiler ( ISP link 2, Ethernet, BGP private AS)
Is it possible to achieve this via 1841?
On 7/15/07, Mike Kraus (mikraus) <mikraus@cisco.com> wrote:
>
> The HWIC-4ESW's ports cannot be configured as Layer 3 ports (you can't
> issue no switchport). Now, you can assign the ports to vlans, and of
> course you can assign IPs to the SVIs associated with those VLANs.
>
> The 1841 does not support the addition of any additional routed layer
> ports.
>
> See here for configuration of the HWIC-4ESW:
> http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_
> chapter09186a00804554c7.html
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Chamara Peris
> Sent: Saturday, July 14, 2007 5:16 PM
> To: Cisco certification
> Subject: Confusion on HWIC-4ESW
>
> Hi Group,
>
> I am planning to add hwic-4esw to one of my routers. But I am not
> exactly sure how this interface can configure for IP address. Cisco site
> indicates it's a L2 switching ports. All I want is to increase my
> Ethernet ports on
> 1841 by one more (comes with two Fast ethernet ports). By using
> hwic-4esw can it be configured with all 4 ports with 1 ip address
> (which gives me the additional ip address I required) or can it be
> configured with ip address to each port?.
>
>
> Or any other module for 1841 to achieve this?.
>
> Thanks
> CP
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART