From: Gary Duncanson (gary.duncanson@googlemail.com)
Date: Fri Jun 22 2007 - 07:16:06 ART
Interesting. Going by the configs used R4 *appears* to be R3 in figure 11.
Typo? I wonder if this doc is correct?
----- Original Message -----
From: "Bhaskar Sivanesan" <bas_bharath@yahoo.com>
To: "ccie forum" <ccielab@groupstudy.com>
Sent: Friday, June 22, 2007 10:37 AM
Subject: Reg. autoinstall
> HI all
>
> A query regarding autoinstall over FR WAN connections.
>
> When there is no config in the NVRAM, the default config in a serial
> interface would be HDLC. So how does the router communicate over the FR
> network to get its config from a remote TFTP server.
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hcf_c/ch15/cfhanstl.htm#wp1199668
> is the link that speaks about the autoinstall procedure. But am not
> getting how the router speaks Frame-relay without any configuration.
>
> Thanks
> Bhaskar
>
>
>
> ---------------------------------
> Sucker-punch spam with award-winning protection.
> Try the free Yahoo! Mail Beta.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:50 ART